2KV High Tension Oscilloscope Probe

An oscillscope probe is a specialized testing tool used in electronics and electrical engineering. It is typically used in conjunction with an oscilloscope to measure and analyze electronic signals, it consists of a probe tip and a cable with a connector that can be plugged into the oscilloscope. The probe tip is designed to make contact with the circuit or component being tested. It typically has a sharp point or a clip for attaching to the test point.

The main function is to inject a known frequency signal into a circuit. This signal can be used to stimulate the circuit or component under test and observe its behavior on the oscilloscope. The probe generates a stable and precise waveform, usually a sine wave or a square wave, at a specific frequency.

By connecting the probe to the circuit or component of interest, the oscilloscope can display the response of the circuit to the injected signal. This allows engineers and technicians to analyze the circuit's frequency response, amplitude characteristics, phase relationships, and other parameters.

The probes are commonly used in applications such as troubleshooting, circuit analysis, frequency response measurement, filter testing, and waveform observation. They provide a convenient and accurate means of injecting test signals into circuits and obtaining visual representations of the circuit's behavior on the oscilloscope display.

示波器探頭是電子和電氣工程中使用的專用測試工具。 它通常與示波器結合使用來測量和分析電子訊號。探頭由探頭尖端和帶有可插入示波器的連接器的電纜組成。 探針尖端設計用於與被測電路或組件接觸。 它通常有一個尖點或一個夾子用於連接到測試點。

示波器探頭的主要功能是將已知頻率訊號注入電路。 此訊號可用於激勵被測電路或組件，並在示波器上觀察其行為。 探頭在特定頻率下產生穩定且精確的波形，通常是正弦波或方波。

透過將振盪器探頭連接到感興趣的電路或組件，示波器可以顯示電路對注入訊號的反應。 這使得工程師和技術人員能夠分析電路的頻率響應、振幅特性、相位關係和其他參數。

探頭通常用於故障排除、電路分析、頻率響應測量、濾波器測試和波形觀察等應用。 它們提供了一種方便而準確的方法，可以將測試訊號注入電路並在示波器顯示器上獲得電路行為的直觀表示。